|
(You know what they say, Happy Wife,
Happy Life)
This example of the 2500 sq. ft. home is a true story. Mr. Larue
of Texas had an HVAC contractor estimate that he needed a 5-ton heating and cooling system for
his home. Mr. Larue sent us his house plans and asked us to accurately size
his heating and cooling system and then provide him with the room-by-room load
calculations. Not only did we size his system, but we will give him a written
guarantee on his average monthly heating and cooling costs.
If Mr. Larue builds his home exactly as we teach, we calculated that his home only
requires a 2.5-ton geothermal system/air-to-air heat pump. This is exactly half the size of Bubba’s recommended
system. Our recommendation was calculated using the
variables that affect heating and cooling loads and it was NOT estimated.
The average cost of a geothermal heat pump is $5000 per ton for a complete
horizontal or vertical loop system. The geothermal system installed by Bubba
was going to cost $25,000 (5-tons * $5000). The geothermal system needed based
on our calculations only costs $12,500. That’s a savings of
$12,500!
IMPORTANT: It didn't
matter if Tom was going to use a geothermal heat pump or air-to-air heat pump. We still
saved him thousands of dollars.
This is just one example, but fact is 9 out of 10 homes have their system sized
incorrectly. If you’ve viewed the New Home Energy Saving video, you’ve learned
that not only does an oversized system cost you more money, but it also makes your
home
Not only were we able to save Mr. Larue $12,500 but we were also able to give him
the most energy efficient window made, give him a large percentage of his hot water for FREE, and
guarantee his average heating and cooling bills not to exceed $50 per
month.
Now his wife can have the kitchen she wants, the bathroom she wants, and all the
glass she wants. We have calculated the heating and cooling loads on hundreds
of homes in many states and have no dissatisfied customers. In almost every
case our advice is to use a smaller heating and air system than originally suggested by the
contractor.
How's this for a return on investment?
Have the best and pay less.
We do not know of anyone that used our services and wished they
hadn’t. However, we know a lot of people that didn’t contact us before
construction and wish that they had. If you've already started
construction it isn't to late. Unless the heating and air contractor has actually
installed your system, contact us today.
It’s simple math. We charge 15 cents per square foot to analyze
your plans (see the Internet special below). On Mr. Larue’s home it
cost him $375 (2500 * 0.15). He spent $375 and saved
$12,500. Not a bad investment!
For those of you that listen to Doug's "Home Remedies" radio show, you are well
aware of Doug's triple pane American Dream Window. Let's look at how using a triple pane
window can save you even more money.
Just the other day we calculated the heating and cooling load for one of the five
sets of house plans in our office. This home was 3100 square feet, two story,
with 17’ ceilings in the living room and family room.
The first calculations using the standard window required that 59.7% of the cooling
load be used for glass only. Got that? Over half of the cooling load is just for the glass in the
home. The next calculations using the American Dream Window required
47.4% of the cooling load for glass. That’s over a 10% reduction in the
required cooling load.
By using the American Dream Window we were able to downsize the geothermal system
ONE FULL TON!! You think that will save some money?
Remember that a geothermal system averages $5000 per ton installed. We just
saved this homeowner $5000 by using the most energy efficient window he can
buy. If this homeowner did nothing else that we teach, he just saved $5000
on a $465 investment!
How Can Our Professional Services Help
You?
God has blessed us over the years and enabled us to help thousands of people all
over the United States and Canada. We do not sell the products we recommend
for a good reason. We research and find only the best products available and
then pass this information on to you. This enables us to change products at
anytime for any reason.
The first step for you to save thousands of dollars on your new home is for you to
mail us your house plans. We will size your heating and cooling system and
give you a written guarantee on your average monthly heating and cooling
bills.
We will need a completed set of plans with the following information clearly
marked:
- North
- Slab or crawlspace foundation
- All window sizes
- Room dimensions
- Square footage of heated and cooled area
- Name, phone number, existing address, address of new home
Limited Time Discount
The normal fee is 15 cents per square foot. For a limited
time only we are offering a discount and will provide our written guarantee home plan analysis
for 12 cents per square foot. That’s a $60 savings on a 2000 square
foot home.
Payment options:
- Send a check for
15 12 cents per square foot along with your plans
- Send a Visa, MasterCard, or Discover card number with expiration date and all
billing information. Your card will be billed for
15
12 cents per square foot.
Your Blueprint For Success
You will receive a comprehensive checklist of energy items to include when building
your new home. You will also receive our written guarantee on your average monthly heating
and cooling bills.
PLEASE
NOTE: If you desire to have a super comfortable home with unbelievably low heating and
cooling bills backed by our written guarantee, simply fill out the form below and we will contact
you as soon as we can.
If you have already begun construction, or
are about to begin construction, please let us know so we can move you to the front of the
line.
Fill out this form and we will be happy to contact you to answer any questions and
give you more information about sending us your plans.
What Happens Next?
After you receive your information from us, we are here to help
you. We have started the Preferred Contractor Network at www.dougrye.com and www.philliprye.com. This is a nationwide
network of trust worthy and reliable contractors in your area that provide the services we
recommend. You can contact these contractors to receive bids on your specific
project.
If you have any trouble whatsoever finding a contractor or product, you may contact
us at either info@philliprye.com or 501-653-7931
and we will be more than happy to assist you.
HOME
|
